Snapmaker J1 - PA (Nylon) Filament Details

Drying temperature & duration 65˚C，6h
Print temperature
230
˚
C–240
˚
C
heated bed temperature
70˚C–80˚C
Retraction distance
0-2mm
Retraction speed
20-50mm/s
Print speed
30mm/s–50mm/s
Fan Close
Standby temperature
140˚C
filaments are recommended PVA、PETG
PA (Nylon)
filament characteristics
Diameter
1.75mm
Density 1.12 G/cm ³ at 23 ˚ C
40