Snapmaker J1 - Page 41

Melt index 12 G/10 min
Glass transition temperature
67°C
Melting temperature
190°C
Tensile strength
66.2 ± 0.9MPa
Flexural modulus
1667 ± 118MPa
Flexural strength
97 ± 1.1MPa
Elongation at break
9.9 ± 1.5%
Impact strength 9.6 ± 1.4KJ/㎡
Recommended printing parameters
Drying temperature & duration 100
˚
C，8h
Print temperature
250˚C–270˚C
heated bed temperature
25˚C–50˚C
Retraction distance
0-2mm
41