PA absorbs moisture from the air very easily. Store it in a dry place.
The appropriate storage temperature and humidity for each filament
may vary. It is recommended to consult the information provided by
the filament manufacturer for more detailed guidance.
Retraction speed
20-50mm/s
Print speed
30mm/s–60mm/s
Fan Close
Standby temperature
180
˚
C
filaments are recommended PVA、PA
How to store filaments
Most filaments absorb moisture from the air, particularly PVA and PA. Wet
filaments are likely to affect print quality or clog the nozzle.
After unpacking, store the filament in a vacuum-sealed bag with desiccant, or
in an optional filament drying oven.
The recommended storage temperature is -20 ℃ to 30 ℃.
The recommended storage humidity is below 50%.
Avoid direct sunlight.
In order to ensure the ideal printing effect, it is recommended to use up the
unpacked filaments within one month. Vacuum sealed filaments can be stored for
approx.
To Next Page
Loading...
