PVA is soluble in water, making it ideal for use as a print support (see
Dissolving PVA Supports for details).
PVA absorbs moisture from the air very easily, so store it in a dry
place.
Storage Ambient Temperature &
Humidity
Room temperature, relative humidity < 25%
Drying temperature & duration 80˚C，12h
Operating ambient temperature &
humidity
Room temperature, relative humidity < 25%
Print temperature
215˚C–225˚C
heated bed temperature
25˚C–60˚C
Retraction distance
0-1mm
Retraction speed
10-30mm/s
Print speed
30mm/s–40mm/s
Fan Close
Standby temperature
100
˚
C
filaments are recommended PLA、PETG、TPU、PA、PA-CF、PA-GF
To Next Page
Loading...
