Snapmaker J1 - ABS Filament Details

Easy-Peel PLA can be easily peeled off after molding, making it ideal
for print support.
Standby temperature
120˚C
filaments are recommended PLA、PC、PVA、TPU
ABS
filament characteristics
Diameter
1.75mm
Density 1.12 G/cm ³ at 23 ˚ C
Melt index 9-14 G/10 min
Glass transition temperature
101.1°C
Tensile strength
33.3 ± 0.8MPa
Flexural modulus
2844 ± 411MPa
Flexural strength
72.8 ± 0.7MPa
32