ABS produces smoke and particulate matter that is harmful to the human
respiratory system when printing. Please use this kind of filaments in
a well-ventilated place or with air purification equipment.
Elongation at break
2.7 ± 0.4%
Impact strength 12.6 ± 1.1KJ/㎡
Recommended printing parameters
Print temperature
245˚C–265˚C
heated bed temperature
90˚C–100˚C
Retraction distance
0-2mm
Retraction speed
20-50mm/s
Print speed
30mm/s–50mm/s
Fan Close
Standby temperature
160˚C
filaments are recommended
ABS
To Next Page
Loading...
