Snapmaker J1 - TPU95 Filament Details

TPU95
filament characteristics
Diameter
1.75mm
Density 1.20-1.24 G/cm ³ at 23 ˚ C
Melt index 3-6g/10min
100% modulus
9.4 ± 0.3MPa
Elongation at break
330.1 ± 14%
Shore hardness
95A
Recommended printing parameters
Storage Ambient Temperature &
Humidity
Room temperature, relative humidity < 25%
Drying temperature & duration 65˚C，8h
Operating ambient temperature &
humidity
Room temperature, relative humidity < 25%
Print temperature
210˚C–230˚C
34