Snapmaker J1 - Page 31

Easily stripped PLA
filament characteristics
Diameter
1.75mm
Density 1.22 G/cm ³ at 23 ˚ C
Melt index 3-6g/10min
Recommended printing parameters
Drying temperature & duration
55˚C
，
6h
Print temperature
220˚C–230˚C
heated bed temperature
25˚C–60˚C
Retraction distance
0-2mm
Retraction speed
20-50mm/s
Print speed
20mm/s–40mm/s
Fan Open
31