Snapmaker J1 - PLA Filament Details

Applicability of filaments under specific conditions.
PLA
Filament characteristics
Diameter
1.75mm
Density 1.17 G/cm ³ at 23 ˚ C
Melt index 7-11 G/10 min
Glass transition temperature
61°C
Melting temperature
150°C
Tensile strength
46.6 ± 0.9MPa
Flexural modulus
3283 ± 132MPa
Flexural strength
85.1 ± 2.9MPa
Elongation at break
1.90 ± 0.21%
Impact strength
2.68 ± 0.16KJ/
㎡
29