Calibration page
leveling heated bed
See Leveling the heated bed.
Calibrate the Z-axis offset
See Calibrating the Z-Axis Offset.
Calibrate the XY axis offset
See Calibrating XY Offset.
Verify the calibration results
See Verifying the Calibration Results.
Calibrate vibration compensation
Set up the page
Update the firmware
See Updating Firmware.
Connect to a wireless network
Tap Settings > Wi-Fi, select an available wireless network, and enter a password.
Set the language
Click Settings > Language, and then select the language you want to set.
View machine information
Click Settings > About to view the name, model, molding size, IP address, MAC address and storage
space of the machine
To Next Page
Loading...
