CONTENTS
01 Hardware
02 Touchscreen
02 Touchscreen Shows "not responding"
03 Touchscreen Shows "Fabscreen has stopped"
03 Touchscreen Flashes
03 Touchscreen Is Black
04 Linear Module
04 Clunk Sound While the Y-axis Linear Modules are Moving
06 Linear Module Won’t Move Anymore
06 Linear Module Only Moves in One Direction
09 The Slider of Linear Module Comes Loose
12 Stainless Steel Strip of Linear Module Comes Loose
13 3D Printing
13 3D Printing Module Pushes into Print Sheet
17 3D Printing Module Isn't Detected
19 First Layer Doesn't Stick to Print Sheet
21 Touchscreen Keeps Showing Filament Runout
22 Filament Won't Load
25 Blobs of Filament on Nozzle
26 Touchscreen Shows a -30
℃
or Abnormally High Nozzle Temp
27 Heated Bed Won't Heat up
28 Laser
28 Auto Focus Fails
31 Laser Module Emits Weak Laser
33 Stuck in “Processing” during Auto Focus
34 Camera Capture Doesn't Work
To Next Page
Loading...
