Snapmaker A150 - Page 47

Quick Start Guide
|
41
The palette knife is sharp.
Remove the print sheet from the Heated Bed, place it down on a stable and flat surface. You
can also use the palette knife to remove the print.
Share!
Share your prints in our
Facebook group and our
forum.
Filament Runout Recovery & Power-Loss Recovery
Your printer supports filament runout recovery and power-loss recovery, so there is no need to worry about
resuming printing anymore! When the filament runs out, tapReady to Loadand load new filament to resume
printing. In case of power-loss, tapRecover to resume printing after the power has been restored.