6
|
Before You Start
The Snapmaker Enclosure helps
prevent the risk of laser leakage
during the laser process by
effectively filtering laser radiation.
Enclosure
An air purifier should be used
depending on the type and
constituent of the materials you
use, as some materials may release
hazardous and toxic fumes when
laser engraved or cut.
Air Purifier
Solid Horizontal Table
Always operate this machine
indoors on a solid horizontal table or
workbench.
Ensure that there are no flammable
and explosive materials within the
work area or around the machine
during operation, as they may cause
a fire.
Fire Extinguisher
Smoke Detector
Exhaust Venting
1.2 Environment Requirements
To Next Page
Loading...
