Snapper Pro S200X Series - Operator Safety; Seat Belt Inspection and Maintenance

OperatorSafety
,WARNING
Failureto properlyinspectand maintainthe seatbelt
cancauseseriousinjuryor death.
iNSPECTiONANDMAINTENANCEOFTHEROLL
BARSEATBELT
• The seat belt likethe ROLL BAR,needsto be periodically
inspectedto verify that the integrityhas not been
compromised through normal machine use, misuse, age
degradation, modifications, or a roll over. If the seat belt
doesnot pass all of the following tests, it should be
replaced.
• BEFOREEACHUSE- Conductthe following
inspections/maintenanceof the seat belt and retraction
mechanism:
1)
2)
3)
4)
Checkfor dirt or debris in the retraction mechanism.
If dirt or debris is found, it should be removed.
Checkto makesure the retraction mechanism
retracts easily and completely.
Checkfor damageto any part of the seat belt such
as nicks, cuts, loosestitching, or fraying.
Checkthat the buckle and latch operateproperly and
that the latch plate is not excessivelyworn,
deformed, or the buckle isdamagedor cracked. The
seat belt should latch and releaseeasily.
iNSPECTBUCKLE
&LATCH '_
INSPECTWEBBING
10 www.SnapperPro.com