Snapper 1650 - Seat Control

CAUTION: Verify that engine starter
will not engage without depressing
neutral return pedal.
SEAT CONTROL
- NO. 1, FIG. 7
Seat may be moved forward or backward to match
operator size by pulling seat control rearward and
sliding seat to desired position.
Fore and aft seat position has a great effect on
operator comfort as regards the heel and toe trans¬
mission control pedal. Operator can easily determine
this by sitting on Tractor, placing his foot on pedal
with speed selector lever in No. 4 position and mov¬
ing pedal through its full range. If either “Toe
Down" or "Heel Down" position is uncomfortable
move seat backwards or forward to achieve most
comfortable position.
Additional fore and aft movement of seat can be
made by mounting seat on alternate mounting
holes.
Fig. 7 — Seat Control
1. Fore/Aft Seat Control
2. Safety Switch
3. Alternate Mounting Holes
— 11