Snapper 1650 - Rotary Mower; Mower Installation Preparation

TRACTOR SPECIFICATIONS
ENGINE:
Model .
Cylinders .
Horsepower.
Displacement .
Bore.
Stroke .
Crankcase Oil Capacity ..
Weight .
Ignition .
Fuel Syst.em .
Cooling System .
Idle Speed .
Governed Speed (No Load)
Air Intake System .
.Kohler K341AQS
. 1
.16 @3600 rpm
. 35.89 cu. ins.
. 3.75 inches
. 3.25 inches
.3 pints
. 120 pounds
. 12 volt
Internally vented float carburetor and fuel pump
. Air cooled — C.F.M.
. 2100-2300 rpm
. 3600 rpm
. Intake to air cleaner through fan
TRANSMISSION:
Model.
Charge Pressure Relief Valve
Implement Relief Valve.
Transaxle.
System Capacity.
Eaton Hydrostatic Model 11 -025
. 30-50 psi
.700-750 spi
.. Peerless No. 2518 — 2 speed
.5 U.S. qts.
Fuel Tank Capacity .2-3/4 gallons
Battery ..12 volt—46 ampere hour
CHASSIS:
Wheelbase.
Length (Overall) .
Width .
Height (Over Steering Wheel) ..
Ground Clearance (at Rear Axle)
Front Wheel Tread .
Rear Wheel Tread .
Drawbar Height .
TIRES:
Front.16 x 6.50-8 2 Ply
Rear .23 x 10.50-12 2 Ply
.... 47 inches
70-3/4 inches
41-1/2 inches
45-1 /2 inches
.8 inches
.... 29 inches
30-1 /2 inches
. 8-1 /4 inches
Front PTO .
Rear f*TO (Standard on 1650A, Optional for 1650)
Hydraulic 3-Point Lift Linkage.
Weight (Approx.) without Mower.
..Standard
.Speed 2000 rpm
Standard on 1650A, Optional for 1650
.800 lbs.
ACCESSORIES:
See Your Snapper Dealer