Snapper 1650 - New Tractor Pre-Delivery Inspection Check List

FACTORY RECOMMENDED
NEW TRACTOR PRE-DELIVERY INSPECTION CHECK LIST
Customer:
Date
Address
Tractor Model-Serial No. __Engine No_
THIS PRE-DELIVERY INSPECTION CHECK LIST IS PROVIDED TO IDENTIFY THE ITEMS CHECKED
AND IF NECESSARY ADJUSTED BY THE DEALER PRIOR TO DELIVERY OF THIS MACHINE.
INSPECT THE FOLLOWING AND ADJUST IF NECESSARY
ENGINE
□ Engine Oil Level
□ All oil drain plugs
□ Fuel line connections
□ Service air filter
□ Electrical connections
□ Choke control
□ Throttle control
□ Activate battery
□ Alternator charging
□ Engine RPM (idle)
□ Engine RPM (full throttle)
□ Carburetor adjustment
□ Governor performance
□ Safety Switch Operation
□ Transaxie oil level
□ Lubricate fittings
□ Clutch-brake adjustment
□ Steering gear
□ Mower level
CHASSIS
□ Mower blade timing
□ Torque all chassis bolts
□ Wheel bolts (rear)
□ Tire pressure
□ Drive test
□ Is Operator’s Manual with Tractor
INSPECTION PERFORMED BY: Signature
□ Instruments and Controls
□ Wheel tread adjustment
□ Operating procedures
□ Lubrication
Explain the following to the owner
□ Air filter service
□ Tire and battery care
□ Storage
□ Operator's Manual
□ Safety Instructions