To Next PageTo Next PageWhy is the cut rough looking from my Snapper 360Z Zero Turn Rider?
If your Snapper Lawn Mower cut is rough looking, the engine speed might be too slow. Set the engine speed control to FAST. Also, the ground speed might be too fast, so decrease ground speed.
General| Engine Displacement | 724cc |
|---|---|
| Deck Material | Steel |
| Warranty | 3-year limited residential |
| Engine | Briggs & Stratton |
| Cutting Height | 1.5 - 4.5 in |
| Transmission | Hydrostatic |
| Speed | 8 mph forward, 4 mph reverse |
Manual contains critical instructions for initial set-up, operation, and maintenance. Save for future reference.
Defines DANGER, WARNING, CAUTION, and NOTICE symbols and their associated hazard levels.
Emphasizes operator responsibility, common sense, and seeking professional advice for safe operation.
Warns against allowing children near the unit and prohibits giving rides to children to prevent accidents.
Details risks of operating on inclines, maximum slope limits, and safe driving practices on slopes.
Warns about hazards from moving parts, spinning blades, and the importance of operator-present safety systems.
Covers pre-operation checks, keeping clear of moving parts, adult operation, and clearing the work area.
Provides crucial guidelines for safely transporting and storing the unit, including fuel handling precautions.
Details specific rules for operating on slopes, including speed selection and turning.
Covers essential precautions for handling, storing, and refueling with gasoline to prevent fires and explosions.
Details tests to verify the correct functioning of the unit's safety interlock system.
Provides guidance on selecting the correct engine oil viscosity and how to check the oil level.
Provides essential instructions and warnings for safely adding fuel to the unit's tank.
Step-by-step instructions for starting the engine, including choke and throttle usage.
Guides the operator through initial checks and control sequences to begin mowing.
Lists recommended maintenance tasks for the tractor and mower based on operating hours.
Outlines recommended maintenance tasks for the engine, including oil and filter changes.
Provides instructions for draining engine oil using standard or optional quick drain methods.
Lists common problems and remedies for an engine that fails to turn over or start.
Identifies causes and solutions for difficult starting, rough running, or engine knocking.
Addresses problems with the mower not raising or producing an uneven or rough cut.
Provides solutions for the engine stalling when the mower deck is engaged.
