31
UPPER DRIVE SHAFT ASSEMBLY
ITEM PART NO. DESCRIPTION
1 1-4338 DISC, Flexible
2 1-4803 SPACER, Coupling (2)
3 4-7225 FLANGE, Bearing (2) (requires Item 18A, order separately)
(Models MZM2200K & MZM2300K)
4 1-8626 HUB, Drive Shaft Adapter
5 3-2070 WASHER, 13/32 I.D. x 3/4 O.D., Flat (4)
6 4-5254 BELT, Traction Drive (AX Cogged, 34.35 Eff. Length) (2)
-- 7-2357 BELT, Traction Drive (2) (Model ZMT2500KH Only)
7 9-1803 KEY, 3/16 x 1-1/2” Square
8A 7-4916 PULLEY, Dual V-Groove (4.95” O.D.) (requires items 20 & 21)
8B 3-5564 PULLEY, Dual V-Groove (4.95 O.D.) (includes 17B (2))
8C 7-2266 PULLEY, Dual V-Groove (5.45 O.D.) (includes 17A (2))
(used on Model ZMT2500KH Only)
9 4-2805 DRIVE SHAFT, 3/4” Upper
10 9-0848 SET SCREW, 5/16-18 x 1/2” Square Head (2)
11 9-1298 NUT, 5/16-18 Hex Nyloc (3)
12 9-1299 NUT, 3/8-16 Hex Nyloc (2)
13 9-1304 SCREW, 3/8-16 x 1” Hex Head Cap, Grade 5 (2)
-- 9-1328 SCREW, 3/8-16 x 1-1/4” Hex Head Cap, Grade 5 (2)
14 9-1320 WASHER, 3/8” Split Lock (2)
15 9-1497 SCREW, 3/8-16 x 1-1/2” Hex Head Cap, Grade 5 (2)
16A 9-1508 BOLT, 5/16-18 x 3/4”, Carriage, Grade 5 (3)
(Models MZM2200K, MZM2300K & ZM2501KH)
16B 9-1928 BOLT, 5/16-18 x 1-1/4” Square Neck Carriage Gr. 5 (3)
17A 9-1802 SCREW, 5/16-18 x 5/8”, Socket-Head (2)
17B 9-2018 SET SCREW, 5/16-18 x 3/4” Square Head (2)
18A 1-5971 BEARING (MZM Models Only, use with item 19)
18B 5-4655 ASSEMBLY, Flange/Bearing/Lock Collar
(Includes 1-4625, 3/4” Lock Collar w/Set Screw and 4-5246, Flange Bearing)
19 1-4625 LOCK COLLAR, 3/4” I.D. (includes 1/4-28 set screw)
20 7-4917 PULLEY HUB, Taper-Lock
21 9-1814 SCREW, 1/4-20 x 1-1/4” Hex Head Cap (2)
22 7-2318 SUPPORT, Bearing Mount
MID MOUNT Z-RIDER MANUAL No. 06110
To Next Page
Loading...
Need help?
General
