26
Using a Bluetooth headset
When a Bluetooth headset is connected, you can transfer audio from the conference
phone to the headset.
Note: Only calls to a SIP account can be transferred to the Bluetooth headset.
Audio for cell phone calls can only be routed between the C520-WiMi and the cell
phone. You can use a DECT headset for both SIP account calls and cell phone calls.
To route audio to a BT headset, a SIP call must be established first at the C520-WiMi.
You can then route the SIP call using the
Device 2
soft key or using the key on the
Bluetooth headset.
Transferring conference phone audio to a Bluetooth headset:
1. During an active SIP account call, press
or to view the
Device 2
soft key.
2. Press
Device 2
.
Audio is transferred to the headset and the headset icon appears.
To transfer audio back to the C520-WiMi, press
Use SPK
.
Conference phone operation
To Next Page
Loading...
