Snom C520-WiMi - Sending a Multicast

41
6. Use the dial pad keys to enter the name and number.
• Press
123
to switch between entering numbers, lower-case letters, and
upper-case letters.
• When you start entering characters, the
Cancel
soft key changes to
Backspc
. Press
Backspc
to delete incorrect characters.
• After completing a line, press to move to the next line.
7. Press and then press or to select the line you want to use for this speed dial
entry.
8. When you have entered the desired information, press
Save
.
Sending a Multicast Page
Your phone supports multicast paging. You can send a page to a paging zone that has
been set up by your system administrator. An incoming page may interrupt any active
calls you are on, depending on how your system administrator has configured the
paging function.
To send a multicast page:
1. When the phone is idle, press
.
2. With Features highlighted, press
.
3. Press
to highlight Multicast Paging, and then press .
4. On the Multicast Paging menu, press to highlight the desired paging zone.
5. Press .
You will hear a paging tone before you can begin broadcasting your message to the
assigned paging zone.
6. Press
End
to terminate the page.
Phone Features