Snom M25 User Manual

34
User Manual M65 / M85 / M25 Getting to know
M25
On the M25, the LED indicator for MWI, missed calls, and low battery can signal information in red
only. The default setting is missed call(s).
• Missed call: 2 quick red flashes.
Note: Opening the All calls menu and viewing the missed call(s) will turn o the missed
call indicator. For more information, see "Call history (call lists)" on page 50.
1. Press the center of the navigation key
to open the menu.
2. Press the right rim of the navigation key twice
to select the "Calls" symbol .
1. Press the center of the navigation key to open the call list.
2. Press the cancel key
to return to the idle screen.
• Changing the setting:
1. Press the center of the navigation key
to open the menu.
2. Navigate to the Settings menu
and press the OK key (see "Navigation and "OK" keys" on
page 35).
3. Select "LED signal" (Fig. 1).
4. Select one of the three options missed call, voice message, or low battery or turn the LED o
entirely by selecting "o" (Fig. 3).
Fig. 1 Fig. 2
Speakerphone key LED
M65
The speakerphone key has a red LED which lights up when speakerphone is turned on during a call.
Press the speakerphone key again to turn o speakerphone and the red LED.
Hard keys
Keypad illumination
The M65 and the M85 have illuminated keypads, the M25 does not. The LEDS will light up when any
key on the keypad is touched. When the keypad is not touched for the number of seconds specified in
the Power save setting, the LEDs will be turned o; the default setting is 60 seconds.

Snom M25 Specifications

General

Quantity	1
Speakerphone	Yes
Compatibility	M700, M300
Number of melodies	6
Brand compatibility	snom
Headphone connectivity	3.5 mm
Display type	TFT
Product color	Black
Display diagonal	1.44 \
Display resolution	128 x 128 pixels
Standby time	75 h
Battery form factor	AAA
Number of batteries supported	2
Harmonized System (HS) code	85177900

Weight and Dimensions

Depth	23 mm
Width	42 mm
Height	134 mm