Snom PA1 User Manual

snom PA1 Quick Start Guide
15
E
N
G
L
I
S
H
12. Device will save new settings and restart. When the start-up with the
network settings is complete, the red and the green LED will both be
glowing steadily.
13. Continue with "Logging on an account".
NOTE: Press the "IP/Reset" button briefly to hear the current IP
Address of the snom PA1 (in English) over the connected
loudspeaker or in the headset.
lOggiNg ON aN accOuNt
This is the PA1's phone number you dial from a phone to make an an-
nouncement over the PA1's loudspeaker.
autOmatically
(recommended) by using the provisioning server. For more details on auto
provisioning snom devices see www.snom.com/wiki .
maNually
1. In the menu on the left, click on "Identity 1" setup. The page
"Configuration Identity 1" opens with the "Login" tab active.
2. Enter the data required by your network in the text fields:
a. Account: Name/phone number.
b. Password: Password for your account.
c. Registrar: Registrar address of your PBX software.
3. Click on "Save" and "Re-Register".
If the registration has been successful, the green "Call" LED will light up, the
red "Power" LED will turn off. Your snom PA1 is ready for operation.

Snom PA1 Specifications

General

Remotely operated	Yes
Number of amplifier channels	- channels
Number of audio source inputs	-
Product color	Black