Do you have a question about the Snom PA1+ and is the answer not in the manual?
Crucial safety guidelines for device operation and installation.
Instructions for connecting the PA1+ to a network and power.
Initial setup procedures, including DHCP and manual IP configuration.
Setting up SIP accounts (identities) to enable announcements.
Step-by-step guide to making audio announcements via the PA1+.
Steps for rebooting the device and resetting to factory default settings.
Crucial safety guidelines for device operation and installation.
Instructions for connecting the PA1+ to a network and power.
Initial setup procedures, including DHCP and manual IP configuration.
Setting up SIP accounts (identities) to enable announcements.
Step-by-step guide to making audio announcements via the PA1+.
Steps for rebooting the device and resetting to factory default settings.
| Protocols | SIP, RTP |
|---|---|
| Audio Codecs | G.711, G.722, G.729 |
| Power over Ethernet | 802.3af |
| Audio Output | 3.5 mm jack |
| Compliance | CE, FCC |
Loading...