16
snom PA1+ User Manual Initializing and conguring
If the registration has been successful, the red Power LED will turn o. The green Call LED will stay
on, indicating that the PA1+ is ready to receive announcements.
Settings
Normally, it is only necessary to set the time zone and the tone scheme. You can adjust the default
settings for loudspeaker volume and automatically ending calls as necessary or desired.
Time zone
1. Open the web interface.
2. Click Advanced in the menu on the left side of the window page. The Advanced Settings page
opens to the Network tab.
3. In the Time section select your time zone (i.e., country/city) from the drop-down menu of
Timezone.
4. Click Apply at the bottom of the page.
5. The Save button appears at the top of the page. Click Save to save the changes permanently in
case of power loss.
Tone scheme
1. Open the web interface.
2. Click Preferences in the menu on the left side of the window page. The "Preferences" page opens.
To Next Page
Loading...
Need help?
General
