17
snom PA1+ User Manual Initializing and conguring
3. In the General Information section select your country from the drop-down list of Tone Scheme.
4. Click Apply at the bottom of the page.
5. The Save button appears at the top of the page. Click Save to save the changes permanently in
case of power loss.
Automatic termination of calls
This setting determines after how many seconds calls to the PA1+ will be terminated. The default
setting is 300 seconds.
1. Open the web interface.
2. Click Preferences in the menu on the left side of the window page. The Preferences page opens.
3. In the PA1+ Controls section, enter the number of seconds in the text eld of Phone ends call
after set seconds.
4. Click Apply at the bottom of the page.
5. The Save button appears at the top of the page. Click Save to save the changes permanently in
case of power loss.
Adjusting the volume
1. Open the PA1's web interface.
2. Click Preferences in the menu on the left side of the window page. The Preferences page opens.
You can change the default setting for the speaker volume in the PA1+ Controls section.
3. Enter a number between 1 (low) and 15 (high) in the text eld of Speaker Volume. The default
setting is 10.
4. Click Apply at the bottom of the page.
5. The Save button appears at the top of the page. Click Save to save the changes permanently in
case of power loss.
To Next Page
Loading...
Need help?
General
