WATER INLET ~ WATER FILLING ~ ICE MAKING
~ WATER RELEASING ~ ICE DROPPING
All these processes are automatically controlled for
continuous ice-making.
Should the water supply deplete or the ice storage bin reach
capacity, the operational panel's indicator light will activate, and
the ice-maker will cease operation automatically. The insulated
design of the ice storage bin serves to maintain the ice in a solid
state for an extended period.
• Water treated with reverse osmosis purification often gives a false
water indicator, it is advised to fit an inline mineral filter for the
sensors to detect the water.
• Ice cycle time is dependent on water temperature. Clean and drain
the appliance at least one or twice a month. Lemon juice or 10ml
vinegar can be added to the water to help the cleaning process.
• To prevent lime build-up it is advised to clean the appliance with a
descaling liquid once a month, dependent on the water quality in
your area.
INSTALLATION INSTRUCTIONS
Before installing your new appliance, please read all safety
instructions in this manual and follow the installation
instructions below:
WATER
05
To Next Page
Loading...
