L
lanyard anchors, 1-1, 4-4, 8-9
level ground, 3-3
level sensor interlock, 8-6
lifting with a forklift, 10-2
loss of hydraulic power, 11-1
low voltage warning light, 7-1, 7-2, 7-3, 9-1
lower control station, 8-4
lower controls, 4-1, 7-1, 9-1
lowering alarm, 4-1, 8-5, 8-9
M
maintenance, 1-2
manual of responsibilities, 1-2
minimum safe approach distance, 3-1
O
Occupational Safety and Health Administration
(OSHA), 1-1
operation, 3-2
operator’s manual, 8-2
manual holder, 8-2
options, 1-1
overall height, stowed, 2-2
overall length, stowed, 2-2
overall width, 2-2
P
parking brakes, 8-4
placards and decals, 3-3, 8-10
cleaning, 3-3
Snorkel part number, 8-10
platform, 9-3
raising and lowering, 9-3
platform capacity, 3-3
platform extend trigger, 9-3
platform extension, 8-8
platform raise/lower and speed, 7-2
platform raise/lower switch, 7-1, 9-1
positioning safety prop, 4-3
pothole protector
interlock, 8-5
interlock test, 8-5
skids, 4-2
preparing for operation, 9-1, 9-2
prestart inspection, 3-2
prestart inspection table, 8-1
R
rated work load, 9-3
reservoir, 8-3
capacity, 2-2
fluid level, 8-3
level indicator, 8-3
S
safety alerts, 1-1
safety prop, 4-3
scissors arm rollers, 8-7
securing for transport, 10-3
slide blocks, 8-7
steering, 9-2
stowing safety prop, 4-3
stowing work platform, 10-1
structures, 8-7
mechanical, 8-7
weldments, 8-7
swinging gate, 1-1, 4-2
swing-out tray, 8-2, 9-4
latch keeper, 9-4
T
tie-down lugs, 10-1
tip-over and falling hazards, 3-3
tires, 2-2
toeboard height, 2-2
towing, 11-1
training, 1-1
transporting work platform, 10-1
turning radius, 2-2
U
upper control station, 8-8
upper controls, 4-1, 7-2, 9-1
W
wheel lug nuts, 8-4
winching work platform, 10-1
windy or gusty conditions, 3-3
work place inspection and practices, 3-2
working height, 2-2
SL 20 – 300206
Index
To Next Page
