Socket CHS Series 7 - Page 112

112
IMPORTANT! Print out the page to scan the barcodes. Do not scan them onscreen.
Good Scan Indicators
Scan to Enable Description Scan to Disable
Beep after
decoding data
(default)
Beep after
computer / device
acknowledges a
successful scan
(default)
7P only: Vibrate
after Decoding
Data (default)
7P only: Vibrate
after computer /
device
acknowledges a
successful scan
(default)
Data Mode
Packet Mode (default)
Configures the CHS to transmit decoded data in packet
format.
Raw Mode
Configures the CHS to transmit decoded data in raw
(unpacketed) format.
Do not scan this barcode in SPP or iOS mode.