20
• For Firefox, click Save File. In the Downloads list, double-click on the
SocketScan10Setup.exe file. In the warning screen, click OK.
• For Chrome, click Save at the bottom of the screen. Click on the link for the
SocketScan10Setup.exe file. In the Security Warning screen, click Run.
3. The installation wizard will launch. Follow it to install software for Windows Desktop.
If you are running an older version of SocketScan 10, uninstall it before
proceeding with the newer SocketScan 10 installation. Make sure SocketScan
10 is not running before you start the uninstall process, and when prompted,
restart your computer to complete the uninstallation.
4. A message will state that on the next screen, you will need to configure an incoming Bluetooth
serial COM port to connect with the CHS. Click Yes.
To Next Page
Loading...
