Socket S700 - Code 39 Full ASCII and Code 93 Symbology Control; Code 39 Full ASCII Enable;Disable; Code 93 Enable;Disable; Code 93 Length Settings

Socket User Manual (V 1.2) 2017/11/06
28
 Enable/Disable Code 39 Full ASCII (11h)
R : 00 00 05 C7 04 00 11 S1 S2
W : 00 00 07 C6 04 00 FF 11 01 S1 S2
Enable Code 39 Full ASCII
W : 00 00 07 C6 04 00 FF 11 00 S1 S2
*Disable Code 39 Full ASCII
Code 93
 Enable/Disable Code 93 (09h)
R : 00 00 05 C7 04 00 09 S1 S2
W : 00 00 07 C6 04 00 FF 09 01 S1 S2
Enable Code 93
W : 00 00 07 C6 04 00 FF 09 00 S1 S2
*Disable Code 93
 Set Lengths for Code 93 (1Ah & 1Bh)
One Discrete Length : Length 1 = value , Length 2 = 0.
Two Discrete Lengths : Length 1 > Length 2.
Length Within Range : Length 2 > Length 1.
Any Length : Length 1 = 0, Length 2 = 0
R : 00 00 05 C7 04 00 1A S1 S2
R : 00 00 05 C7 04 00 1B S1 S2
W : 00 00 07 C6 04 00 FF 1A 04 S1 S2
Length 1
W : 00 00 07 C6 04 00 FF 1B 37 S1 S2
Length 2
Triple Setting , input 2 digits , Range : 00~55.