Socket S700 - I 2 of 5 Transmission and Conversion Settings; Transmit I 2 of 5 Check Digit; Convert I 2 of 5 to EAN-13; Discrete 2 of 5 Enable;Disable

Socket User Manual (V 1.2) 2017/11/06
32
 Transmit I 2 of 5 Check Digit (2Ch)
R : 00 00 05 C7 04 00 2C S1 S2
W : 00 00 07 C6 04 00 FF 2C 01 S1 S2
Transmit I 2 of 5 Check Digit (Enable)
W : 00 00 07 C6 04 00 FF 2C 00 S1 S2
*Do Not Transmit I 2 of 5 Check Digit (Disable)
 Convert I 2 of 5 to EAN-13 (52h)
This parameter converts a 14 character I 2 of 5 code into EAN-13, and transmits to the host as EAN-13. To
accomplish this, I 2 of 5 must be enabled, one length must be set to 14, and the code must have a leading zero
and a valid EAN-13 check digit.
R : 00 00 05 C7 04 00 52 S1 S2
W : 00 00 07 C6 04 00 FF 52 01 S1 S2
Convert I 2 of 5 to EAN-13 (Enable)
W : 00 00 07 C6 04 00 FF 52 00 S1 S2
*Do Not Convert I 2 of 5 to EAN-13 (Disable)
Discrete 2 of 5
( 對應 Marson 的 Industrial 25 & IATA )
 Enable/Disable Discrete 2 of 5 (05h)
R : 00 00 05 C7 04 00 05 S1 S2
W : 00 00 07 C6 04 00 FF 05 01 S1 S2
Enable Discrete 2 of 5
W : 00 00 07 C6 04 00 FF 05 00 S1 S2
*Disable Discrete 2 of 5