socomec DIRIS Digiware D-50 - Page 41

41EN
DIRIS Digiware D-50 & D-70 - 548088B - SOCOMEC
• Data Push
- Authentication
 Site name: This setting is essential to connect the D-50/D-70 display to a physical location within the project
structure. Default Site name is “SITE” and must be changed (in EMS export mode only) or a system alarm will
be triggered.
 Server name: Unique identier of the display. The default server name is the NET ID, displayed on the home
screen of the D-50/D-70 display.
- Data Logger
 Server: To send data les to a remote server, the Administrator selects the FTP(S) server
 Destination folder: Enter the remote server directory for receiving the les
 Upload log les: Select if you want the display to also send the log le to the remote server
 Address: Enter the IP address of the remote server
 Port: Enter the software port (usually 20 or 21 for FTP and 990 for FTPS)
 User name: enter the user name the access the remote server. It must be consistent with the User name
congured on the FTP server.
 Password: enter the password to access the remote server. It must be consistent with the password
congured on the FTP server.
 Secure communication: open a secure session between the display and the remote server
 File format: data can be exported in different le formats (CSV and EMS – see appendices 1 and 2). The CSV
format is easier to use while EMS is better for importing data into an external energy management software.
 Test connectivity: Test the FTP export function