OBJECTIVES
The aim of these specifications is to provide:
• the information required to choose the right uninterruptible power supply for a specific application.
• the information required to prepare the system and installation site.
The specifications are intended for:
• installation engineers.
• design engineers.
• engineering consultants.
INSTALLATION REQUIREMENTS AND PROTECTION
Connection to the mains power supply and to the load(s) must be made using cables of suitable size, in accordance
with current standards. If not already present, an electrical distribution panel which can isolate the network upstream
of the UPS must be installed. This electrical distribution panel must be equipped with a protection device (or two, if
there is a separate bypass line) of an appropriate rating for the power drawn at full load.
For detailed information, see the installation and operating manual.
To Next Page
Loading...
Need help?
General