98
3. STANDARD AND OPTIONS
3.1 STANDARD ELECTRICAL FEATURES
• Dual input mains.
• Internal maintenance bypass.
• Backfeed protection: detection circuit and driver.
• EBS (Expert Battery System) for battery management.
• Distributed and shared battery
• Energy saving mode (applicable on parallel systems) to optimise efficiency according to load rate and enhance the
UPS lifetime.
• Gen-set compatibility.
• Protection against incorrect cabling
3.2 ELECTRICAL OPTIONS
• Internal backfeed protection contactor.
• External maintenance bypass.
• External battery cabinet.
• Enhanced battery chargers.
• External temperature sensor
• Parallel kit.
• ACS synchronisation system, to synchronise the UPS to an external source.
• Redundant cooling fan for bypass
• Neutral kit for 3 wires (no neutral) input
• Ground Neutral connection for TNC system
• Connection kit for common mains
• Isolation transformer with isolation control device
3.3 STANDARD COMMUNICATION FEATURES
• User-friendly multilingual interface with 7" touch colour graphic display.
• 2 slots for communication options.
3.4 COMMUNICATION OPTIONS
• Dry-contact interface.
• PROFIBUS.
• BACnet/IP interface
• NET VISION: professional WEB/SNMP interface for UPS monitoring and shutdown management of several operat-
ing systems.
• EMD: Net vision Environment Temperature and Humidity sensor with 2 inputs
3.5 REMOTE MONITORING SERVICE
• LINK-UPS, remote monitoring service that connects your UPS to your Critical Power specialist 24/7.
3.6 MECHANICAL OPTIONS
• Seismic kit
• IP21 protection degree
• Anti-vermin kit
• Top air exhaust module (only for 1930 mm cabinet)
• Top entry cable module (only for 1930 mm cabinet)
To Next Page
Loading...
Need help?
General