socomec SNMP Card II - Initial Network Configuration

12 GB
SNMP CARD II - SOCOMEC
2.6. SNMP CARD Initial Confi guration
1. Select SNMP CARD Confi guration from the SNMP CARD Management of the main menu to
setup the network confi guration parameters (Figure 2-4).
2. Click the Become Administrator button at the bottom of the screen. Enter SNMP as the login
name and admin as the password. (Case sensitive)
3. Enter the SNMP CARD IP address.
4. Enter the SNMP CARD Gateway Address in the network.
5. Enter the SNMP CARD Subnet Mask of the network.
6. Click the Set Values to save the settings.
7. Select Date and Time from the SNMP CARD Management of the main menu and enter the
appropriate date and time information in the specifi ed format.
8. Select Set Values to save the date and time settings.
9. Select SNMP CARD Control to enable or disable the network protocols (Figure 2-5).
10. Select Apply to save the changes.
Figure 2-4 SNMP CARD initial confi guration page screen.