What to do if socomec STATYS XS 16A displays error code Er03 to Er06?
If your Socomec Switch shows error codes Er03 to Er06, it could be due to a disconnection from the electrical grid. Check the connection from the electrical grid to the Statys XS input. It may also be due to an abnormal electrical grid, in which case you should request service from a professional electrician.
What to do if socomec STATYS XS 16A Switch shows error code Er22 to Er33?
If the Socomec Switch displays error codes Er22 to Er33, this indicates abnormal internal components. Please contact us for assistance.
What to do if Socomec Switch shows error code Er16?
If your Socomec Switch displays error code Er16, it indicates an overload. To resolve this, check the load capacity connected to the switch.
Why is my socomec STATYS XS 16A Switch Statys XS off?
If your Socomec Switch Statys XS is OFF, several factors could be at play. First, ensure the switch is properly connected to the electrical grid. If the grid is abnormal, request service by a professional electrician. Also, check if the input breaker has tripped and reset it if necessary. If none of these steps work, the internal components may be damaged, and you should contact the distributor.
What to do if power is supplied to the load but Socomec Switch panel remains off?
If power is being supplied to the load but the Socomec Switch panel remains off, it suggests that internal components have been damaged. In this case, please contact the distributor.
General instructions for safe handling and connections.
Avoids specific locations and environments for safe operation and storage.
Explains safety symbols located inside and outside the unit.
Details electrical hazards and necessary precautions for personnel.
Highlights dangers from power cuts and connection procedures.
Describes the automatic transfer system with two independent power supply circuits.
Lists the contents of the product packaging and accessories.
Details the components and functions of the front panel interface.
Explains the symbols and displays shown on the LCD screen.
Identifies the input and output connections on the rear panel.
Describes the RS-232, USB, and dry contact communication ports.
Guidelines for selecting an optimal location to prevent malfunctions.
Step-by-step instructions for physically installing the unit.
Details upstream protection and circuit breaker recommendations.
Describes the automatic startup process and initial status indicators.
Instructions for manually changing between power sources.
How to read voltage, frequency, current, and load rate.
Explains how to customize settings using dedicated software.
General| Rated current | 16A |
|---|---|
| Input voltage | 230V AC |
| Output voltage | 230V AC |
| Frequency | 50/60 Hz |
| Protection class/degree | IP20 |
| Number of poles | 2 |
| Rated operational voltage | 230 VAC |
| Rated insulation voltage | 500V |
| Rated impulse withstand voltage | 4 kV |
| Mechanical durability | 10, 000 operations |
| Terminal capacity | 16 mm² |
To Next Page