Need help?Do you have a question about the socomec STATYS series and is the answer not in the manual?
General| Type | Automatic Transfer Switch (ATS) |
|---|---|
| Frequency | 50/60 Hz |
| Number of Poles | 3, 4 |
| Protection | Short Circuit |
| Humidity | 95% RH non-condensing |
| Standards | IEC 60947-6-1, UL 1008 |
| Applications | Data centers, Industrial |
| Technology | Static switch (Solid-state) |
| Operating Temperature | -25°C to +60°C |
Essential precautions for the optimal use and installation of STATYS.
Information on electrical hazards and safe handling during operation.
Guidelines to prevent inadvertent power cuts and associated safety hazards.
Overview of the mimic panel's LCD screen and LED indicators.
Detailed breakdown of the graphic mimic panel's display areas and elements.
Detailed explanation of the status indicated by each LED on the mimic panel.
How alarms are displayed, acknowledged, and managed within the system.
Prerequisites for commissioning, including source voltages and switch states.
Steps for powering up the STATYS unit and activating control electronics.
Procedure for defining the primary power source for the load.
To Next Page