Need help?Do you have a question about the socomec Asys 16 A Transfer System and is the answer not in the manual?
Provides crucial safety notices regarding handling, installation environment, and cable management.
Outlines how to interrupt the supply to the load and specifies fire extinguishing methods.
Instructs on recycling packaging materials in compliance with local laws.
Highlights essential safety precautions like earthing, qualified personnel, and avoiding hazardous voltages.
Explains the ASYS as a two-way automatic switch for redundant AC power supply sources.
Details procedures for checking goods upon receipt and initial storage guidelines.
Lists the components included in the ASYS module package.
Specifies storage temperature, humidity, and careful handling procedures to prevent damage.
Defines installation requirements for temperature, humidity, and protection from dust/water.
Provides instructions and options for mounting the ASYS unit in a rack or cabinet.
Specifies minimum space requirements around the unit for adequate airflow.
Describes the front panel of the ASYS TRANSFER SWITCH with its LED display and interfaces.
Details the connectors, terminals, and interfaces located on the back of the ASYS.
Explains how functions are driven by the internal control device and the role of the operating panel.
Lists the primary capabilities of the ASYS, including redundant power and compatibility.
Explains the meaning of LEDs, buttons, and fault indicators on the ASYS panel.
Describes how the ASYS supplies power from the selected source and handles source outages.
Provides technical specifications for input and output voltages, current, and transfer times.
Details the inlet and outlet connection types for ASYS 16A-120 and ASYS 16A-230 models.
Defines the pin assignments and definitions for the Dry Contact communication port (DB-9).
Lists the physical specifications including dimensions, weight, structure, material, and color.
Details operating and storage environment parameters like temperature, humidity, and altitude.
Lists the relevant safety standard (EN62310-1) with CE Mark compliance.
Specifies compliance with EMI and EMS standards including IEC62310-2 and IEC61000 series.
Details the overload and output short-circuit protection characteristics and timings.
Provides a table of common problems, their possible causes, and recommended solutions.
To Next Page
General
