ASYS
16 A Transfer System
ENGLISH
IOMASY160810-GB_00
INTENDED USE
The ASYS TRANSFER SWITCH device is used as a power source selector providing a
redundant power supply to the load.
It runs on a single phase network. The device is compliant with all relevant safety
regulations concerning information technology equipment, including electronic
equipment for use in an oce environment.
WARNING
This document provides important instructions for a safe installation, operation and
use of the ASYS.
It is advised that this User Manual be consulted before installation of the equipment,
which operation should only be performed by skilled personnel.
DEVICE OVERVIEW
The ASYS is available in two voltage levels, 120 Vac and 220/230/240 Vac.
The nominal current 16A is available for both voltage levels.
Please strictly follow the procedures when switching the ASYS ON
or OFF. In all circumstances all repairs must only be executed by au-
thorized and skilled personnel.
This equipment complies with the European Community directives for professional
equipment. Hence it is labelled as follows: .
To Next Page
Loading...
