What to do if Socomec Switch displays error code Er03 to Er06?
If your Socomec Switch shows error codes Er03 to Er06, it could be due to a disconnection from the electrical grid. Check the connection from the electrical grid to the Statys XS input. It may also be due to an abnormal electrical grid, in which case you should request service from a professional electrician.
What to do if socomec STATYS XS 32A Switch shows error code Er22 to Er33?
If the Socomec Switch displays error codes Er22 to Er33, this indicates abnormal internal components. Please contact us for assistance.
What to do if Socomec Switch shows error code Er16?
If your Socomec Switch displays error code Er16, it indicates an overload. To resolve this, check the load capacity connected to the switch.
Why is my Socomec Switch Statys XS off?
If your Socomec Switch Statys XS is OFF, several factors could be at play. First, ensure the switch is properly connected to the electrical grid. If the grid is abnormal, request service by a professional electrician. Also, check if the input breaker has tripped and reset it if necessary. If none of these steps work, the internal components may be damaged, and you should contact the distributor.
What to do if power is supplied to the load but socomec STATYS XS 32A Switch panel remains off?
If power is being supplied to the load but the Socomec Switch panel remains off, it suggests that internal components have been damaged. In this case, please contact the distributor.
Information on electrical hazards and necessary precautions for safe intervention.
Instructions to prevent inadvertent power cuts and associated safety risks.
Detailed instructions for the physical setup and installation of the STATYS XS.
Details on upstream protection and recommended circuit breaker ratings.
Procedure for manually changing the active input power source.
To Next Page
General