3
STATYS 200-1000A - Ref.:OPMSTA200910-GB_06
ENGLISH
2. 1.
Thank you for choosing the STATYS Static Transfer System from SOCOMEC.
This equipment complies with the IEC 62310-2 product standard concerning Static Transfer Systems (STS).
This equipment conforms to the EC directives applicable to this type of product. This conformity is indicated by the
CE mark:
2. 2.
For connection of STATYS, refer to the installation notice.
Carefully read this manual before operating STATYS.
CAUTION
For optimal use, it is recommended to maintain the ambient temperature and humidity at the values specied by the
manufacturer.
DANGER
When in shutdown mode, a STS remains powered by supplies at the input of each of the two sources.
2. 3.
In normal operating conditions, there is no danger for personnel handling this equipment.
WARNING
All operations and maintenance must be performed by authorised personnel who have undertaken suitable training.
Scrupulously follow the operating or maintenance instructions described in this manual.
Take maximum precautions and determine which parts are live:
• by following the load diagrams,
• by checking the presence of potential with a voltmeter, for example.
2. 4.
WARNING
Scrupulously follow the operating instructions described in this manual to prevent inadvertent power cuts which may
pose a safety hazard to the user.
2. SAFETY PROCEDURES
To Next Page
Loading...
Need help?
General