Sodi SR5 - ASSEMBLY OF THE STEERING COLUMN AND STEERING WHEEL; Tightening Steering Column Support; Steering Wheel Assembly

SR5 MANUAL
4.4 TIGHTENING THE PLASTIC STEERING COLUMN SUPPORT.
¾ Tighten the CHC M8x65 screw (8).
4.5 ASSEMBLY OF THE STEERING WHEEL.
¾ Tighten the steering wheel (1) with the 3 FHC M6x30 screws, on the steering wheel support
(2).
¾ Tighten the steering wheel support on the steering column.
Check:
once the steering system is assembled, please check that the steering wheel is free to
make a quarter of a turn right and left.
9 A bad assembly or a bad adjustment of the steering system can lead to accidents.
9 Systematically check the tightening of the system and its adjustment.
2
STRAIGHT PART
FORWARD
1
8
- 8 -