Sodi SR5 - 6- Assembly of the Seat and of the Seat Stiffeners

SR5 MANUAL
6-ASSEMBLY OF THE SEAT AND SEAT STIFFENERS.
¾ The washers of the seat fixing kit comply with CIK/FIA and with your local national
rules.
6-1 GROUND CLEARANCE
1
4
F
I
X
I
N
G POI
N
TS
Measurements given below correspond to
the standard adjustment of the seat,
recommended by SODIKART, for the SR5.
Get the seat supports (1) closer, or wider,
depending on the seat size.
Use the shims of the seat fixing kit to get a
good fit.
SEAT
GROUND
1Bar
24mm or 6 rear s
p
rockets
- 10 -