Need help?Do you have a question about the Sodi SR5 and is the answer not in the manual?
Step-by-step guide to fitting the steering column support, including screw and bolt details.
Details on tightening the CHC M8x65 screw for the plastic steering column support.
Instructions for connecting the steering column to the ball joint and securing it with a bolt.
Steps to attach the steering wheel to its support using screws and secure it to the column.
Procedure for connecting the tie-rods to the stub axle arms, ensuring proper screw and bolt usage.
Essential safety rules and required personal protective equipment for drivers before racing.
Specifies standard stub axle height adjustments for dry and wet conditions.
Details on adjusting front tracking width using hubs and spacers for different track conditions.
Provides standard measurements for rear tracking width.
Guidance on adjusting the rear axle position and tightening the central bearing.
Information on how to adjust the kart's weight distribution using eccentrics.
Detailed guide on adjusting front width with spacers and hubs for dry and wet tracks.
Explanation of how to adjust camber and caster angles using eccentric components.
Procedure for setting wheel parallelism using an adjustment tool and measuring tie rod lengths.
Chart detailing recommended tyre pressures for slick and wet conditions at different temperatures.
General| Brand | Sodi |
|---|---|
| Model | SR5 |
| Category | Gasoline vehicles |
| Language | English |
To Next Page