To Next PageTo Next PageWhat to do if my Sofar solar Inverter shows a GFCIFault?
If the GFCIFault occurs occasionally, it might be due to abnormal external circuits. The inverter should automatically return to normal once the issue is resolved. If the fault happens frequently and persists, inspect the insulation resistance between the PV array and the ground. Also, check the insulation of the PV cable.
What to do if my Sofar solar Inverter displays a GridOFP alarm frequently?
If the GridOFP alarm occurs frequently, verify that the grid voltage and frequency are within the acceptable range. If they are not, contact technical support. If they are within range, check the AC circuit breaker and AC wiring of the inverter. If the grid voltage/frequency is within the acceptable range and AC wiring is correct, while the alarm occurs repeatedly, contact technical support to change the grid over-voltage, under-voltage, over frequency, under-frequency protection points after obtaining approval from the local electrical grid operator.
Why does my Sofar solar 110KTL show a TempFault_HeatSink1 error?
The TempFault_HeatSink1 error on your Sofar solar Inverter indicates that the ambient temperature around the installation area is too high. To resolve this, improve ventilation to lower the temperature.
What does GridOVP mean on my Sofar solar 110KTL?
If your Sofar solar Inverter is showing a GridOVP alarm occasionally, it means the electric grid is experiencing occasional abnormalities. The inverter should automatically return to normal operation.
What should I do if my Sofar solar 110KTL Inverter displays a HwADFaultIGrid error?
Turn OFF the “DC switch”, wait for 5 minutes, then turn ON the “DC switch”. Check whether the fault is rectified. If not, please contact technical support.
General| Max. DC Voltage | 1100V |
|---|---|
| MPPT Voltage Range | 200-1000V |
| Number of DC Inputs per MPPT | 2 |
| Rated AC Voltage | 400V |
| Rated Grid Frequency | 50/60Hz |
| Total Harmonic Distortion (THD) | <3% |
| MPPT Efficiency | 99.9% |
| DC Switch | Yes |
| Output Voltage | 400V |
| Rated Output Power | 110000W |
| Max. AC Apparent Power | 121 kVA |
| Communication | RS485 |
| Model | Sofar solar 110KTL |
| Max. AC Output Current | 175 A |
Covers essential safety instructions and requirements for installation and maintenance.
Details requirements for qualified personnel, product labels, and installation location selection.
Covers safe transportation practices and crucial safety precautions for electrical connections.
Details safety procedures for maintenance and explains electromagnetic compatibility and noise levels.
Guides users on checking outer packing materials and deliverables before installation.
Provides guidelines and illustrations for selecting an appropriate and safe installation position.
Details the steps for wall mounting and bracket installation of the inverter.
Details the procedure for connecting the inverter to the grounding electrode using a ground cable.
Explains how to connect the grid side (AC output) and wiring precautions.
Guides on connecting the PV array to the inverter's DC input terminals safely.
Explains the procedure for turning on the DC switch and AC circuit breaker to start the inverter.
Lists common error codes, their descriptions, and solutions for diagnosing and resolving issues.
