80-136KTL User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd
3.Inverter Storage
If inverter is not installing immediately, storage condition need meet below
requirements:
Place inverter into the original package and leave desiccant inside, sealed
tight with taps.
Keep the storage temperature around -40 ℃ ~70 ℃ , Relative humidity 0 ~
95%, no condensation
Figure 3-1Storage temperature and humidity
The maximum stacking layer number cannot exceed 3 layers.
If the inverter be storage for more than half years, the inverter needs to be
fully examined and tested by qualified service or technical personnel before
using