BTS E5~20-DS5 user manualV1.1
Copyright © Shenzhen SOFARSOLAR Co., Ltd
1) Battery type settings：
3. Set the
mandatory
full -
charge
time
2) Set discharge depth: Set the following parameters as required：
①Discharge depth：② EPS discharge depth：③EPS restore the
discharge
3) Set the mandatory full - charge time（The time difference is no less
than 3 hours）
4) Save
Note: If batteries are connected to both battery channels of the inverter,
perform the preceding steps to set battery parameters for batteries 1 and
2.
Configures an address automatically
After battery parameters are set, ensure that the system has reliable PV
or utility power supply.
Configu
res an
address
automa
tically
Configure
s an
address
automatic
ally：
Note：
The online batteries quantity is displayed on the auto IP address
configuration page. You can configure the IP address
automatically only after comparing the connected batteries
To Next Page
Loading...
Need help?
General
