SOFAR 3.3~12KTLX-G3 User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd.
Qualified Person
When inverter is working, it contains lethal voltages and went hot in some area.
Improper installation or maloperation could cause serial damage and injury. To
reduce the risk of personal injury and to ensure the safe installation and
operation of the product, only a qualified electrician is allowed to execute
transportation, installation, commissioning and maintenance. Shenzhen
SOFARSOLAR Co, Ltd does not take any responsibility for the property
destruction and personal injury because of any incorrect use.
Label and Symbols
SOFAR 3.3~12KTLX-G3 has type label attach the side of product which contact
important information and technical data, the type label must permanent
attached to the product.
SOFAR 3.3~12KTLX-G3 has warming symbol attached the product which contact
information of safety operation. The warming symbol must permanent attached
to the product.
Installation location requirement
Please install the inverter according to the following section. Place inverter in an
appropriate bearing capacity objects (such as solid brick wall, or strength
equivalent mounting surface, etc.) and make sure inverter vertical placed. A
proper installation location must have enough space for fire engine access in
order for maintenance if faulty occur. Ensure the inverter is installed in a wall
ventilated environment and have enough air-cooling cycle. Air humidity should
less than 90%.
To Next Page
Loading...
Need help?
General
