What causes Reserved (ID113) error on Sofar solar KTLX-G3 Inverter?
Check if the ambient temperature of the installation position exceeds the upper limit. If it does, improve ventilation to decrease the temperature. Also, check whether the inverter has dust and whether there are foreign matters blocking the fan at the air inlet.
What causes CT Disconnect error on Sofar solar KTLX-G3 Inverter?
Check the wiring of input, output and communication according to the user's manual. If the use method is not ruled out, please contact the new energy customer service of Capital Airlines.
What to do if Sofar solar KTLX-G3 Inverter GridUVP alarm occurs frequently?
If the GridUVP alarm occurs frequently, first check if the grid voltage/frequency is within the acceptable range. If it is not, contact technical support. If the voltage/frequency is ok, check the AC circuit breaker and AC wiring of the inverter.
Why does my Sofar solar KTLX-G3 Inverter show GridOVP?
If the GridOVP alarm occurs occasionally, it is likely due to occasional abnormalities in the electric grid. The inverter will automatically return to normal operation when the electric grid stabilizes.
What to do if Sofar solar Inverter shows GridOFP repeatedly?
If the grid voltage/frequency is within the acceptable range and AC wiring is correct, while the GridOFP alarm occurs repeatedly, contact technical support to change the grid over-voltage, under-voltage, over frequency, under-frequency protection points after obtaining approval from the local electrical grid operator.
How to fix FanFault1 on Sofar solar KTLX-G3 Inverter?
Check the inverter for dust and foreign objects blocking the fan at the air inlet. If found, improve the ventilation and heat dissipation of the environment.
What to do if Sofar solar KTLX-G3 Inverter displays OVRT?
If your Sofar solar Inverter displays OVRT, turn OFF the “DC switch”, wait for 5 minutes, then turn ON the “DC switch”. Check whether the fault is rectified. If not, contact technical support.
What to do if Sofar solar Inverter displays unrecoverH wAcOCP?
If your Sofar solar Inverter displays unrecoverH wAcOCP, turn OFF the “DC switch”, wait for 5 minutes, then turn ON the “DC switch”. Check whether the fault is rectified. If not, contact technical support.
Why does my Sofar solar Inverter show BusUVP?
If the configuration of the PV array is correct, the BusUVP error could be because the sun irradiation is too low. Once sun irradiation returns to normal, the inverter will work normally again.
General| Brand | Sofar solar |
|---|---|
| Model | KTLX-G3 Series |
| Category | Inverter |
| Language | English |
Important notice regarding product features, terms, and contract conditions.
Emphasizes the manual as an integral part of the equipment for future reference.
States the copyright ownership and restrictions on copying the manual.
Conforms installation and maintenance to laws, regulations, and applicable standards.
Explains safety instruction and general information symbols used in the manual.
Specifies that only qualified electricians should handle the inverter due to lethal voltages.
Details requirements for inverter placement, ensuring adequate space and ventilation.
Guidelines for transporting the inverter in its original or proper package.
Safety precautions for electrical connections, including covering PV arrays and using certified engineers.
Safety procedures for maintenance, including turning off power and waiting periods before work.
Information on electromagnetic compatibility and noise emission levels of the inverter.
Explains safety symbols found on the inverter and its type label for proper understanding.
Defines the inverter's purpose as a transformer-less on-grid PV inverter.
Lists compatible grid configurations like TN-S, TN-C, TN-C-S, TT, and IT grids.
Provides physical dimensions and mounting details for the inverter models.
Explains the working principle and internal components of the inverter.
Illustrates the schematic diagram of the inverter's internal circuits and connections.
Presents power efficiency curves and rated power ratio vs. grid voltage data.
Outlines the step-by-step procedure for installing the inverter.
Details checks for outer packing materials and delivered components before installation.
Lists and describes the necessary tools required for installation and electrical connection.
Guides on selecting an appropriate location for the inverter for optimal performance.
Instructions on how to safely unload and move the inverter to the installation site.
Provides detailed steps for mounting the rear panel and hanging the inverter.
Instructions for connecting the inverter to the grounding electrode using a ground cable.
Details on connecting the inverter to the utility grid using AC power cables and circuit breakers.
Step-by-step guide for connecting the PV array to the inverter's DC input terminals.
Information on connecting communication ports (USB, COM) for data transmission and monitoring.
Instructions for inspecting AC and DC voltage and connections before initial operation.
Steps to turn on the DC switch and AC circuit breaker to start the inverter.
Describes the buttons, LED indicators, and LCD screen of the inverter's operation panel.
Displays various operating statuses like PV input, power generation, and grid voltage.
Accesses settings, event lists, system information, and software updates.
Procedure for upgrading the inverter's software via a USB flash drive.
Provides guidance on identifying and resolving potential errors and fault codes.
General maintenance guidelines, including cleaning the inverter, heat sink, and fans.
Specific steps for cleaning and maintaining the inverter's fans to ensure proper heat dissipation.
Lists key DC input specifications like voltage, current, and MPPT parameters.
Details AC output specifications including rated power, maximum current, and grid voltage.
Provides efficiency ratings and self-consumption data for the inverter.
Lists various protection mechanisms like DC reverse polarity and anti-islanding.
Covers ambient temperature, topology, IP rating, altitude, noise, weight, and dimensions.
Defines the standard warranty duration and calculation methods based on invoice or production date.
Information on applying for and purchasing extended warranty services for the inverter.
Lists conditions and reasons under which equipment failure is not covered by the warranty.
To Next Page